Skip to content
Products

Heat Pumps

Australia's most complete hot water range. Backed like no other.

Solar, heat pump, gas — whatever your water heating needs, Envirosun has a system for it. Every product is Australian-designed for Australian conditions, backed by industry-leading 10-year transferable warranties* and engineered to ensure serious long-term savings. One range. One local team. No runaround.

Heat pumps

Air-source technology delivers hot water at up to 73% less running cost than standard electric. No gas connection required. R290 eco-friendly refrigerant. Works down to −7°C. Two models — next-gen M9 or proven Classic.

HP Plus M9 - 200L / 330L
Heat pump · M9 series

HP Plus M9 - 200L / 330L

Next-gen inverter · R290 · 42 dBA · Ground-mounted

Two years in development. Inverter technology with R290 eco-refrigerant delivers up to 73% energy savings vs standard electric. At 42 dBA — one of the quietest heat pumps in Australia. Available in 190L and 330L.

7-yr tank 5-yr compressor 2-yr electronics

Key Features

  • Inverter technology

    Fast recovery, higher efficiency

  • R290 eco-refrigerant

    Low GWP, eco-friendly

  • 42 dBA quiet operation

    One of the quietest in Australia

  • Solar-ready

    Store up to 21kWh with rooftop PV

  • Triple anodes

    Maximum corrosion protection

  • 3 modes

    Eco · Mute · Fast recovery

  • Frost-proof to -7°C

    Reliable in all Australian climates

At-a-Glance

ES200M9 / ES330M9
Capacity 190L · 330L
Suits 2–4 · 4–6 people
Noise 42 dBA
Refrigerant R290
Operating range -7°C to 45°C

STC comparison — Zone 3

Envirosun HP Plus M9
73%
Stiebel Eltron
66%
Bosch / Rheem / Rinnai
61%
Dux Airoheat
56%

New M9 STC data in progress — placeholder until confirmed

HP Plus 250L
Heat pump · Classic

HP Plus 250L

Established platform · R134a · 46 dBA · 246L

Manufactured by the world's largest appliance manufacturer, proven in European conditions for over a decade. In Australia's warmer climate, efficiency and recovery times are even better. Backed by 11 how-to videos for fast installer confidence.

7-yr tank 5-yr compressor 2-yr electronics

Key Features

  • Up to 71% energy savings

    COP 3.41 at 15°C vs standard electric

  • Solar-ready

    Maximises daytime solar PV use

  • Dual magnesium anodes

    Double corrosion protection

  • Legionella protection

    Automatic periodic heat cycle

  • 11 how-to videos available

    Full install & setup series, ready now

  • Frost-proof to -7°C

    Proven in colder European conditions

  • Smart Vacation mode

    Saves energy while property is empty

At-a-Glance

250ES1-15
Tank volume 246L
Suits 3–5 people
COP @ 15°C 3.41
Noise 46 dBA
Refrigerant R134a / 0.9kg

STC comparison — Zone 3 energy savings

Envirosun HP Plus 250L
71%
Stiebel Eltron
66%
Bosch / Rheem / Rinnai
61%
Dux Airoheat
56%

Data valid at time of publishing. Values reduce 10% each calendar year.

HP Plus specifications
Specification ES200M9 ES330M9 250ES1-15
Total water capacity 190L 330L 246L
Rated voltage / frequency 220-240V/50Hz 220-240V/50Hz 220-240V/50Hz
Tank max pressure 850kpa 850kpa 850kpa
Corrosion protection Magnesium rod Magnesium rod Magnesium rod
Waterproof grade IPX4 IPX4 IPX4
Performance (20°C/15°C Ambient air temperature, 15°C–55°C water temperature)
Power input of electric element 1500W 1500W 1500W
Rated power input of heat pump 780W 820W 495W
Maximum power input of heat pump 1500W 1500W 865W
Maximum power input 1500W 1500W 1500W
Average heating capacity by heat pump 3200W 3300W N/A
Default temperature setting 60°C 60°C 55°C
Temperature setting range — with heater 60°C – 75°C 60°C – 75°C 35°C – 75°C
Max working pressure of refrigerant 1.0/3.3MPa 1.0/3.3MPa 0.8/2.8MPa
Refrigerant type / weight R290/0.42kg R290/0.47kg R134a / 0.9kg
Sound pressure level @ 2m 42dB(A) 42dB(A) 46dB(A)
Ambient temperature for heat pump and element -7~45°C -7~45°C N/A
Ambient temperature of heat pump -7~45°C -7~45°C -7–45°C
Water inlet and outlet connection Rp ¾" Rp ¾" G3/4" F
TPR valve connection Rp ¾" Rp ¾" G3/4" F
Drain & Water inlet connection Rp ¾" Rp ¾" G3/4" F
Product dimensions 580×620×1746mm 710×740×1923mm 600×629×1987mm
Packing dimension with pallet 695×695×2060mm 745×745×2263mm 736×695×2250mm
Net / Gross weight 93/119kg 119/148kg 102/115kg
Filled weight of the appliance 282kg 449kg N/A

Right here for Aussie plumbers.

Just good, local expertise on tap. No offshore call centres. No runaround.